AXIS Q2901-E PT Mount Temperature Alarm Camera

PT mount-ready and remote temperature monitoring

  • 360° endless pan and 135° tilt with AXIS T99A11 Positioning Unit
  • Temperature alarm zones
  • Isothermal palettes
  • Spot temperature reading
Mô tả

AXIS Q2901-E PT Mount Temperature Alarm Camera – Under specific conditions, some Axis thermal cameras are capable of precise temperature measurements, but they are not designed by Axis for the specific intention of human fever detection nor the diagnosis, mitigation or prevention of disease or health conditions. Thus, Axis thermal cameras are, for example, not approved by FDA in the US for this use.

Informations about AXIS Q2901-E PT

Temperature detection

AXIS Q2901-E PT Mount offers two kinds of alarms triggered by a deviation of the temperature: if the temperature goes above or below a set limit, or if the temperature increases too rapidly. The camera can detect the temperature of an object between-40 °C to 550 °C (-40 °F to 1022 °F). The accuracy is +- 5 ° in temperatures below 150 °C (302 °F). The accuracy is +- 5 ° in temperatures below 150 °C (302 °F). To reach an unobstructed field of view (360°) and a ground-to-sky view of 135°, you can mount the PT mount thermal camera on AXIS T99A11 Positioning Unit.

Isothermal palettes

 Isothermal imaging makes it possible to configure highlighted temperature-spans in the image. They help to define which temperature corresponds to which color. The Lower limit denotes the temperature where the colored part of the palette will start and all temperatures above this limit will stand out.

Spot temperature reading

This capability is used to view the temperature of a particular area of the image. The emissivity can also be adjusted (depending on the material characteristics) to get a more precise reading. Used as a visual aid for an operator.

Technical specifications of AXIS Q2901-E PT

Models: AXIS Q2901-E PT Mount 19 mm 8.3 fps / AXIS Q2901-E PT Mount 9 mm 8.3 fps

Camera

 
Image sensor Uncooled microbolometer
Thermal sensitivity (NETD) <50 mK
Thermal sensor resolution 336×256

Video

 
Max video resolution 720×576
Max frames per second 8.3
Electronic image stabilization –
Multiple color palettes Yes

Lens

 
Focal length * 19 / 9 mm
Horizontal field of view * 17 / 35 °
Vertical field of view * 13 / 27 °

Compression

 
Zipstream –
H.264 Baseline, Main
Motion JPEG Yes

Audio

 
Audio Support –

System Integration

 
Audio detection –
Active tampering Yes
Alarm inputs/outputs –
Serial connectors Yes
Video motion detection Yes

Network

 
PoE Class 3

Security

 
Signed firmware –

General

Check out the products on the manufacturer’s website here