AXIS Q2901-E Temperature Alarm Camera offers two kinds of alarms triggered by a deviation of the temperature: if the temperature goes above or below a set limit, or if the temperature increases too rapidly. The camera can detect the temperature of an object between -40 °C to 550 °C (-40 °F to 1022 °F).
Informations about AXIS Q2901-E Temperature Alarm Camera
Under specific conditions, some Axis thermal cameras are capable of precise temperature measurements, but they are not designed by Axis for the specific intention of human fever detection nor the diagnosis, mitigation or prevention of disease or health conditions. Thus, Axis thermal cameras are, for example, not approved by FDA in the US for this use.
Technical specifications
Models: AXIS Q2901-E 9 mm 8.3 fps / AXIS Q2901-E 19 mm 8.3 fps
Camera
| Image sensor |
Uncooled microbolometer |
| Thermal sensitivity (NETD) |
<50 mK |
| Thermal sensor resolution |
336×256 |
Video
| Max video resolution |
720×576 |
| Max frames per second |
8.3 |
| Electronic image stabilization |
– |
| Multiple color palettes |
Yes |
Lens
| Focal length * |
9 / 19 mm |
| Horizontal field of view * |
35 / 17 ° |
| Vertical field of view * |
27 / 13 ° |
Compression
| Zipstream |
– |
| H.264 |
Baseline, Main |
| Motion JPEG |
Yes |
System Integration
| Audio detection |
Yes |
| Active tampering |
Yes |
| Alarm inputs/outputs |
2 |
| Serial connectors |
– |
| Video motion detection |
Yes |
General
| Local storage (memory card slot) |
Yes |
| Operating temperature |
-40 to 60 °C |
| Outdoor Ready |
Yes |
| IP rating |
IP66, IP67 |
* Some technical specifications may vary depending on which hardware option you choose.
Check out the products on the manufacturer’s website
here
